Tips when changing a tap valve
How to measure a tap valve
1/2" quarter turn ceramic tap valves
1/2" quarter turn ceramic tap valves (2)
3/4" quarter turn ceramic tap valves
3/4" replacement standard bath tap valve
1/2" replacement standard basin tap valve
1/2" replacement compression tap valve
3/8" replacement standard basin tap valve
1/2" BSP Q turn valve with 24 tooth spline
Short 1/2" BSP Q turn CD valve with 24 tooth spline
3/4" BSP QT Tap valve with 24 tooth spline (Type A)
3/4" BSP QT Tap valve with 24 tooth spline (Type B)
1/2" BSP quarter turn valve with 18 tooth spline
Tap head screws - M4 x 10mm
Long stem quarter turn valve with chrome stem
Long stem left quarter turn valve with chrome stem
Long stem standard valve with chrome stem
Long stem standard 3/4" tap valve chrome stem
Long stem 3/4" quarter turn valve
Drinking water filter tap valve
40mm replacement mono mixer tap cartridge
40mm replacement open outlet mixer cartridge
35mm replacement mixer tap cartridge
35mm replacement open outlet mixer cartridge
40mm replacement joystick mixer tap cartridge
35mm replacement joystick mixer tap cartridge
25mm replacement mixer tap cartridge
25mm mixer tap cartridge - side fix version
INTA thermostatic tap cartidge replacement
45mm ceramic mixer tap cartidge replacement
47mm ceramic mixer tap cartidge replacement
STSR thermostatic shower cartidge replacement
Non Concussive Replacement Cartridge
Control flow non concussive cartridge
Replacement timer tap cartridge

Replacement 1/2" BSP standard tap valve (Basin tap type)



Type B - 1/2" BSP replacement Tap Valve - compression washer type

Click here for tips and advice

Index > Tap Spares > Type B - option 1/2" Tap Valve (compression washer type)

Type B - option 1/2" Tap Valve (compression washer type)



An option 1/2" BSP compression type tap valves. (The ones with a washer)


Typically found in basin and kitchen taps with 15mm (or 1/2") supply pipework.


1/2" BSP thread on body.


NOTE this valve is threaded ONLY below the collar. If you require a thread above the collar (to secure bezel or cowling) please look at the Option A type.


Sold individually.

Check your valve against this item for:

1. Appearance

2. Measurements shown on diagram

3. Check your valve seat in tap for damage. If pitted or damaged you will need to re-cut the seat. In extreme cases you may need to replace the tap.



Suitable for use on the hot or cold side (Clockwise turn to close valve)

The spline is 8mm nominal diameter with 20 teeth

(For valve with 18 or 24 teeth on the spline please click here)



These items are known to be suitable for the following:



Price: inc VAT

Type B 1/2" Compression Tap valve

Hot or Cold - 19.99 Each


Telephone order

Replacement basin tap valve