Standard 1/2" BSP replacement Tap Valve - compression washer type

Index > Tap Spares > 1/2" BSP replacement Tap Valve - compression washer type

Traditional 1/2" Tap Gland (compression washer type)

Suitable to replace most 1/2" compression type tap valves. (The ones with a washer)

Typically used in basin and kitchen taps with 15mm (or 1/2") supply pipework.

1/2" BSP thread.

Please NOTE how this valve is thread above the central collar and typically suits taps with a screw down/on cowling or bezel. If you require a valve without the thread above the collar please view Type B version.

Sold as pair.

Check your valve against this item for:

1. Appearance

2. Measurements shown on diagram

3. Check valve seat in tap for damage.

Note: The overall length of a valve such as this will vary according to where the plunger is positioned. Bear in mind it moves in and out.

(For valve with 18 or 24 teeth on the spline please click here)

These items are known to be suitable for the following:

Price: inc VAT

STD 1/2 Tap valve

Hot  Cold - £25.99 / pair

Telephone order