Leak free alcove shower pods by Envirotech

Add this page to your favourites

Envirotec leak free Alcove shower pod


800mm, 900mm, 1000mm and 1200mm Leak free alcove shower pods

Index > Leak free shower pods > Envirotec > Envirotec Offset and Rectangular shower pods

ENVIROTEC SHOWER PODS ARE PRESENTLY ONLY AVAILABLE IN EIRE

 

THEY ARE UNAVAILABLE IN THE UK

 

Envirotec 800 x 800mm, 900 x 900mm, 1000 x 800mm and 1200 x 800mm Alcove shower pods

Envirotec 1200 Alcove shower pod with sliding door

Envirotec alcove shower pods

Envirotec shower pods have made leaks a thing of the past. The usual places that water escapes from in a traditional shower enclosure have been designed out, so you can enjoy peace of mind.

The GRP technology used to construct Envirotec shower pods is more closely  associated with boat building. The only difference being the pod keeps water in whereas the boat keeps it out!

Envirotec alcove shower pods have been designed for easy handling and with a mind for access. The two smaller models are constructed from two sections, the larger 1200 unit from three. All should pass happily through a normal household door.

The integrity of the structure is achieved by extending the lower wall section from the tray to a height that water simply cannot reach. This exaggerated form of 'upstand' does away with the joint traditionally formed between the tray and wall tiles - the place that leaks normally occur. By removing this weakness there's simply nowhere for water to escape.

Envirotec shower pods are sold as component parts

Envirotec take nothing for granted. You decide what sort of shower equipment to install. You can also decide whether you want to avail yourself of the shower doors offered, or fit an alternative favourite brand.

 

Drawing showing two sections (upper and lower) of the 800 and 900 alcove shower pods

Envirotec pods are delivered 'undrilled'. This is to say, you drill holes and screws only where they are needed.

Envirotec Alcove shower pods are available in three sizes -

Drawing showing three sections (upper, middle and lower) of the 800 and 1200 alcove shower pod

800 x 800mm 900 x 900mm 1000 x 800mm 1200 x 800mm

Plumbing your Envirotec shower pod

Plumbing the Envirotec shower pod is easy. The shower pod is designed to accommodate the mounting of shower equipment - mixer valve, electric or all-in-one power shower shower. Recessed shower equipment may require you to excavate the wall behind the pod to make space. Supplies can be run in the void between the pod and the building wall.

You have a choice when it comes to running the waste. The Envirotec pod is supplied with a 90mm 'top clean' outlet and trap. If the pod is sat directly on the floor (on the adjustable feet) the waste can be run in or under the floor. Should you need to raise the pod in order to run the waste above floor level then a riser kit can be ordered as an optional extra. The riser kit contains legs that raise the pod by 100mm and a plinth panel to neatly cover the void.

Diagram showing critical measurements of the 800mm alcove shower pod

Diagram showing critical measurements of the 900mm alcove shower pod

Diagram showing critical measurements of the 1200mm alcove shower pod

The drawings above provide all the critical dimensions you might need to know for the 800 x 800 alcove pod , the 900 x 900 pod and the 1200 model. Please note the actual 'footprint' size of each may differ slightly to the designated size.

Vertical dimensions for the 800mm and 900mm alcove shower pods

Vertical dimensions 800 and 900 models

 

Vertical dimensions for the 1200mm alcove shower pod

Vertical dimensions 1200 model

Please note: The addition of the riser leg kit can raise the unit by up to 100mm from the floor. Please add this to the overall measurement if used.

Choose from the following door options to fit both the 800, 900 and 1200 alcove shower pods:

Pivot shower door

Bi-fold shower door

1200 sliding shower door

Pivot door Bi-fold door

1200 sliding door

Envirotec Alcove Shower Pod Price list

Select your pod & Easy Plumb Riser Kit (if required) then add the doors and shower equipment of your choice.

Please note: The addition of the riser leg kit can raise the unit by up to 100mm from the floor. Please add this to the overall measurement if used.

ENVIROTEC SHOWER PODS SPECIAL OFFER

               
  Format Shape Size (mm) Finish Colour Price £ inc VAT  
               
  2 Part Alcove 800 Classic White £1,490.00  
               
  2 Part Alcove 900 Classic White £1,550.00  
               
  3 Part Alcove 1000 Classic White £1,670.00  
               
  3 Part Alcove 1200 Classic White £1,730.00  
               
  Easy Plumb Leg and Plinth Kit   White Only £98.50  
  010522            

Order

 

Envirotec Alcove Shower Doors with 6mm glass 

 £ inc VAT 
AL808 - 800mm hinge door 6mm x 1850mm £317.65
AL808 -800mm bifold door 6mm x 1850mm £337.33
AL909 - 900mm hinge door 6mm x 1850mm with Comp. Bars £359.19
AL909 - 900mm bifold door 6mm x 1850mm with Comp. Bars £366.74
AL108 - 1000mm  6mm x 1850mm Glass sliding panel  £349.26
AL128 - 1100mm sliding door 6mm x 1850mm with Comp. Bars poa

07/20

 

The discounted door prices shown apply when bought with a pod. When sold separately a higher price applies.

 

Shower Equipment

      Order
Complete your Envirotec shower pods by adding shower equipment   £ Inc VAT

1

2

1. TMV2 Bar type mixer valve with hose, handset and riser kit Chrome £139.03
2. TMV2 Bar type mixer valve with hose, handset and riser kit + diverter and rain head Chrome £255.64
Your choice of shower equipment is not limited to the two shower valve kits offered above. They do however represent great value when purchased as part of a package.
 
 

Envirotec alcove shower pod in black granite finish

 
 

Order

Telephone for assistance

Print this page

 

 

Self contained leak free alcove shower pods

 

Due to a policy of continual improvement the manufacturer reserves the right to change product specification without notice